PNI IP230T Manual De Usuario página 6

Why is the camera still in the application after the reset?
By resetting, the camera returns to the factory settings, but this procedure
does not delete the camera from the application. If you want this, manually
delete the camera from the application.
How do you connect the camera to another router?
Open the application, delete the camera from the list, then reset the camera
and repeat the configuration steps on the new WiFi network.
Why does the camera not recognize the microSD card?
It is recommended to insert and remove the micro SD card from the camera
only when the camera is not powered.
Check the card in a computer and format it FAT32.
The application may display the error "could not find the SD card" in case of
poor connection of the mobile phone or of the camera.
The camera is online and has an alarm event, but the mobile phone does not
display the notification
First of all, check the app's permissions.
Under normal circumstances, when an alarm is triggered, a message will appear
in the notification bar of the mobile phone. But when you preview the camera
in real time in the app, you will not receive alarm notifications because it is
considered that you are already watching the live images and notifications are
no longer needed.
Technical specifications
Processor
Image sensor
Resolution
Video compression
Audio compression
Rotation angle
Motion tracking
Minimum illumination
XM530
1/2.9" CMOS F37
full HD 1080P 2MP
Smart H.264+
G.711
Horizontal: 355° / Vertical: 90°
Yes
0.1 Lux@F1.2
User manual - 6