KitchenAid 5KSMPEXTA Manual Del Propietário página 5

PRODUCT ASSEMBLY
ASSEMBLING THE PASTA PRESS
1.
Rotate Cutter away from the Housing base so that the Auger may be inserted. Insert
Auger into Housing base, cross-tab first. Auger should settle completely inside of Housing.
2.
Place selected Pasta Plate onto Housing base so that the Pasta Plate's tab inserts into
Auger base.
3.
Screw Pasta Ring onto Housing base until it is seated firmly in place.
ATTACHING THE PASTA PRESS
1.
Turn Stand Mixer OFF (0) and unplug.
2.
For Stand Mixers with a hinged attachment hub cover: Flip up to open.
For Stand Mixers with a removable attachment hub cover: Turn the attachment knob
counterclockwise to remove attachment hub cover.
3.
Insert Attachment Shaft Housing into the Attachment Hub, making certain the Power Shaft
fits into the square hub socket. If necessary, rotate the Pasta Press back and forth. The pin
on the attachment Housing fits into the notch of the hub rim when in the proper position.
4.
Tighten the Stand Mixer Attachment Hub Knob until the Pasta Press Attachment is
completely secured to the Stand Mixer.
PRODUCT USAGE
MAKING PASTA
IMPORTANT: When using the Pasta Press, do not wear ties, scarves, loose clothing or long
necklaces; gather long hair with a clasp.
1.
Prepare pasta dough (see "Recipes" section in online Product Guide ). Form dough into
walnut-sized balls.
NOTE: The Pasta Press is designed to be used with Pasta Dough only. To avoid damaging
your Pasta Press, do not insert anything other than pasta dough.
5