FUXTEC E212C Manual De Instrucciones Original página 53

Original User Manual 40V chainsaw C212_214_de_en_ita_fr_es_rev4
15 Oil tank with oil level indicator
16 Housing
17 Ventilation openings
18 Battery*
EP20 (2,0 Ah), EP40 (4,0 Ah), EP60 (6,0 Ah)
19 Release button for battery
20 LED state of charge indicator
21 Battery charger *
* Optional. Depending on the delivery scope.
Instructions for use
WARNING!
Switch the device off and remove the battery under the following conditions:
– if the device is left unattended;
– before checking, cleaning or performing other work on the device;
– if the device starts vibrating excessively.
Before initial operation
Unpack the garden tool and accessories and ensure no parts are missing or damaged.
NOTE
The batteries (optional - depending on delivery scope) are not fully charged on delivery. Before
initial operation, charge the batteries fully. See the user manual of the battery charger.
Adjustments before using delete this line
Assembling
Attaching saw rail and saw chain
WARNING!
- The teeth on the saw chain are very sharp! Wear protective gloves when per- forming any work
on the chain. Risk of injury!
- An incorrectly attached saw chain will cause the power tool to cut in an uncontrolled manner!
When attaching the chain, observe the specified running direction!
53