METRO PROFESSIONAL GNC1008 Manual De Instrucciones página 12

5. Protect the appliance against
heat. Do not place close to
heat sources such as stoves
or heating appliances.
GB
3. Operation
Control elements
40
110
100 50
90 60
80 70
4. After use
Cleaning
• Clean the appliance every day to keep it in a safe
and hygienic working condition.
• Switch off and unplug the appliance and let it cool
down completely before cleaning or maintenance.
• Do not clean the appliance with steel wool, strong
chemicals, alkali, abrasive or toxic agents, as they
may damage the surface of the appliance and
pose a health hazard.
• Do not immerse the appliance in water or other
liquids to clean it. Never hold the appliance under
running water. Make sure that no water enters the
appliance while cleaning it.
• The appliance is not to be cleaned with a water jet
or a steam cleaner.
• Clean all surfaces of the appliance with a soft
damp cloth and a little mild detergent. Dry with a
soft dry cloth.
• Clean the baskets and cover net in warm water,
using a mild detergent and a soft sponge or
brush. Wipe with a dry and soft cloth.
• The appliance may only be used again after it is
dried completely.
Storage
• Before storage, always make sure that the
appliance is completely dry and cooled down.
• Before storage, remove all foodstuffs and water
from the appliance, disconnect it from the supply
and clean it thoroughly.
Temperature knob
Turn the knob to the desired
temperature (40°C - 110°C).
The appliance heats up and
the heating indicator (red) lights
up. Once the set temperature is
reached, the heating indicator
goes out.
Notes:
• During operation, the heating
indicator turns on and off,
indicating the set temperature
is being maintained.
• Always turn the knob back to
the off position ( ) after use.
• Store the appliance in a dry, protected
environment at room temperature and out of the
reach of children.
• Preferably store the appliance in its original
packaging.
5. Troubleshooting
Overheating protection
When the appliance is about to overheat, it turns
off automatically to prevent damage. In this case,
disconnect the appliance from the electrical supply
and let it cool down completely. Then remove the
cover of the reset button next to the control elements.
Press the reset button down with a thin object (e.g.,
a pen) until you hear a click. Attach the cover again.
The appliance is now ready to be used again.
6. Disposal
Environmental Protection
Discarded electric appliances are
recyclable and should not be discarded
in the domestic waste! Please actively
support us in conserving resources and
protecting the environment by returning
this appliance to the collection centres.
7. Warranty
A statutory warranty applies for this product.
Damages caused by wrong treatment or operation,
by false placement or storage, improper connection
or installation, as well as force or other external
influences are not covered by this warranty. We
recommend careful reading of the operating
instructions as it contains important information.
Note:
1. In case this product does not function correctly,
please firstly check if there are other reasons, e.g.
for electrical appliances interruption of the power
supply, or generally incorrect handling are the
cause.
2. Please note that, where possible, the following
documents or rather information should be
provided together with your faulty product:
– Purchase receipt
– Model description/Type/Brand
– Describe the fault and problem as detailed as
possible
In the case of a claim for guarantee or defects,
please contact the seller.
GWL 8/14 EN
GNC1008
- 11 -
ENGLISH 200911