Srhythm NiceComfort 25 Pro Manual De Instrucciones página 4

How to Use
Use ANC Function
Push the ANC Button to turn Active Noise
Cancellation ON/OFF
(the LED indicator light will be green when ANC
ON.)
Use Bluetooth Function
1.Hold the Multi-function Button for 3-5
seconds to turn headphone Bluetooth on,then
enter pairing mode.(the LED indicator light will
be blue and red flashing quickly.)
2.Start your mobile phone Bluetooth and find
headphone Bluetooth pairing name "Srhythm
NC25 Pro" to click it to pair.(the LED indicator
light will be blue flashing slowly after paired
successfully.)
3‑5S 3.Hold the Multi-function Button for 3-5
seconds to turn headphone Bluetooth off.
Press to adjust volume. Long press to
skip to next/previous song.
Long press the Volume Up and Volume Down
Buttons for 5 seconds to clear the pairing.
Press the Multi-function Button to
play/pause music or answer/end call.
Double-press the Multi-function Button to
Reject an incoming call or Dial out the last call.
5
Press the Multi-function Button three times to
2
turn on/off the low-latency game mode.
3
Function Details
1. Hold the Multi-function Button for 3-5 seconds to
Easy Pairing
turn headphone Bluetooth on,then enter
pairing mode.(the LED indicator light will be blue and
red flashing quickly.)
2. Keep headphone and your mobile phone as close as
possible during pairing process.
3. Turn on your mobile phone Bluetooth. Search for
headphone Bluetooth signal on mobile phone and
click "Srhythm NC25 Pro" to pair.(the LED indicator
light will be blue flashing slowly after pairing
successfully.)
4. If you are asked for a password/PIN code during
pairing procedure,please enter "0000" (four zeros).
Pair to the Second Bluetooth Device
1. Please make sure that headphone is connected to
the first Bluetooth device successfully and music is
not playing.
2. Hold the Multi-function button until the headphone
switch off and continue with the steps "Easy
Pairing"(Let the headphone re-enter pairing
mode,the LED indicator light will flash blue and red
alternately).
3. Pair headphone with the second device according
to "Easy Pairing" steps.
4. Return to the first Bluetooth device and pair it with
headphone again. Now both of your devices are
paired with headphone.
6