Publicidad
Idiomas disponibles
Idiomas disponibles
4. APPENDIX
INSTALL THE WIRE CONTROLLER KIT
6. Carefully bend and break off the rectangular section (upper
left section with two diagonal holes) from the display board.
NOTE: Break off the upper left hand rectangle (section with
the two holes marked with a red rectangle).
7. Replace the old display board (for the New Display board
provided) and secure with the clips. To uninstall the clips,
push the clips inward. NOTE: There are 4 clips just above the
numeric display (88) which run the length of the holder.
15
V.1
Publicidad
