EINHELL GP-LC 36/35 Li Manual De Instrucciones página 14

Separately available accessories
18V 1.5Ah PXC Lithium-Ion battery
18V 2.0Ah PXC Lithium-Ion battery
18V 2.5Ah PXC Lithium-Ion battery
18V 3.0Ah PXC Lithium-Ion battery
18V 4.0Ah PXC Lithium-Ion battery
18V 3.0Ah PXC Plus Lithium-Ion battery
18V 4.0Ah PXC Plus Lithium-Ion battery
18V 5.2Ah PXC Plus Lithium-Ion battery
18V 4.0Ah/6.0Ah PXC Plus Lithium-Ion battery
18V 5.0Ah/8.0Ah PXC Plus Lithium-Ion battery
18V PXC Dual Port Fast Charger
18V PXC Fast Charger
Contact your local retailer for more specifi c
models of batteries and charger available in your
area. You can also explore battery + charger
options at Einhell.com.
3. Intended use
The chain saw is intended for felling small trees
and for cutting trunks, branches, wooden beams,
boards etc. and can be used for cross cuts and
longitudinal cuts. It is not suitable for cutting any
materials other than wood.
The equipment is allowed to be used only for its
prescribed purpose. Any other use is deemed to
be a case of misuse. The user/operator and not
the manufacturer will be liable for any damage or
injuries of any kind resulting from such misuse.
Please note that our equipment has not been
designed for use in commercial, trade or
industrial applications. Our warranty will be voided
if the equipment is used in commercial, trade or
industrial businesses or for equivalent purposes.
Anl_GP_LC_36_35_Li_SPK7_USA.indb 14 Anl_GP_LC_36_35_Li_SPK7_USA.indb 14
EN
4. Technical data
Motor power supply: ............. 36 V
No load speed RPM: .................................... 8200
Bar length:.......................................... 14" (35 cm)
Chain pitch: ........................ ⅜ " (9.5 mm), 52 teeth
Chain Gauge: .............................. 0.043" (1.1 mm)
Saw chain: ...........Oregon
Bar: ..................................Oregon
Cutting speed at rated rpm: ......590.6 ips (15 m/s)
Oil tank capacity: ...................... 3.88 fl oz (115 ml)
Weight (Tool only): ......................... 8.81 lbs (4 kg)
Wear ear-muff s.
The impact of noise can cause damage to
hearing.
Reduce noise generation and vibration to a
minimum!
•
Use only equipment that is in perfect
condition.
•
Maintain and clean the equipment regularly.
•
Adapt your way of working to the equipment.
•
Do not overload the equipment.
•
Have the equipment checked if necessary.
•
Switch off the equipment when not in use.
•
Wear gloves.
5. Before starting the equipment
Warning!
Always remove the batteries before making
adjustments to the equipment.
Danger! Do not fi t the batteries until the chain
saw has been fully assembled and the chain
tension has been set. Always wear protective
gloves when working on the chain saw to protect
yourself against injury.
5.1 Assembly of the bar and the saw chain
•
Carefully unpack all parts and check that they
are complete (Fig. 2-3).
•
Undo the chain tension lock knob of the chain
wheel cover (Fig. 4).
•
Take off the chain wheel cover (Fig. 5).
•
Lay the chain as shown in the groove which
runs around the bar (Fig. 6/See arrow).
•
Insert the bar and chain as shown in the
mounting in the chain saw. At the same time
guide the chain around the chain sprocket
wheel (Fig. 7 and 8/Item 12).
- 14 -
(2x 18V)
90PX052X / 52 Teeth
®
144MLEA041
®
05.12.2022 11:14:45 05.12.2022 11:14:45