EINHELL GP-LC 36/35 Li Manual De Instrucciones página 13

chain saw.
•
Do not overreach and do not cut above
shoulder height. This helps prevent
unintended tip contact and enables better
control of the chain saw in unexpected
situations.
•
Only use replacement bars and chains
specified by the manufacturer. Incorrect
replacement bars and chains may cause
chain breakage and/or kickback.
•
Follow the manufacturer's sharpening
and maintenance instructions for the saw
chain. Decreasing the depth gauge height
can lead to increased kickback.
Residual risks
Even if you use this electric power tool in
accordance with the instructions, certain residual
risks cannot be eliminated. The following hazards
may arise in connection with the equipment's
construction and layout:
•
Cut injuries if no safety clothing is used.
•
Lung damage if no suitable protective dust
mask is used.
•
Damage to hearing if no suitable ear
protection is applied.
•
Health damage caused by hand-arm
vibrations if the equipment is used over a
longer period or is not properly guided and
maintained.
Warning! This electric power tool generates an
electromagnetic fi eld during operation. Under
certain circumstances this fi eld may actively or
passively impede medical implants. To reduce
the risk of serious or fatal injuries, we recommend
persons with medical implants to consult their
doctor and the manufacturer of the medical
implant prior to using the equipment.
SAVE THESE INSTRUCTIONS
Explanation of the symbols on the equipment
(Fig. 30):
1. Read the operating instructions.
2. Wear safety goggles.
3. Wear ear protectors.
4. Never expose the device to rain.
5. Maximum cutting length / chain speed v
590.6 ips (15 m/s)
6. Unlock chain brake before putting into
operation!
Anl_GP_LC_36_35_Li_SPK7_USA.indb 13 Anl_GP_LC_36_35_Li_SPK7_USA.indb 13
EN
2. Layout and items supplied
2.1 Layout
1. Claw stop
2. Front hand guard (chain brake)
3. Front handle
4. Rear handle
5. Safety lock-off
6. On/Off switch
7. Oil tank cap
8. Chain wheel cover
9. Chain tension lock knob
10. Chain tensioning knob
11. Chain oil fi ll level indicator
12. Chain sprocket wheel
13. Push-lock button
14. Rear hand guard
15. Bar
16. Saw chain
17. Chain saw guard
18. Adapter plate
19. Battery capacity indicator
20. Battery capacity indicator button
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
store where you made your purchase at the latest
within 5 work days after purchasing the article and
upon presentation of a valid bill of purchase.
•
Open the packaging and take out the
equipment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
present).
•
Check to see if all the items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, keep the packaging until the end
of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, plastic sheets and small parts. There is
a risk of choking and suff ocating!
•
:
Original operating instruction with safety
u
information
- 13 -
05.12.2022 11:14:45 05.12.2022 11:14:45