Cycplus M2 Manual De Usuario página 7

02.Wheel circumference setting（C3)
Long press [R1 button
1
then press [R1 button
*The screen displays C3 and the below 4 digits flash.
Press [L1 button
2
*Setable digit will be flashing continuously.
Press [R1 button
3
Press [L2 button
4
Press [L1 button
5
Long press [R1 button
6
*The Wheel Circumference only needs to be set when connecting the
ANT+ speed sensor. The unit is MM.
03.Time zone setting（C4)
Long pres [R1 button
1
then press [R1 button
*The screen displays C4 and the 08 (factory setting
time zone) is flashing.
Press [L1 button
2
*'08' stops flashing.
Press [R1 button
3
Press [L2 button
4
Long press [R1 button
5
04.Speed unit setting（C5)
Long pres [R1 button
1
then press [R1 button
*The screen displays C5 and the KMH is flashing.
Press [L1 button
2
*'KMH' stops flashing.
Press [R1 button
3
Long press [R1 button
4
] to enter the setting,
] once.
] to start setting.
] to modify the digit.
] to switch the setable digit.
] to finish setting.
] to return to the main page.
] to enter the setting，
] twice.
] to start setting.
] to modify.
] to switch the selected digit.
] to return to the main page.
] to enter the setting,
] thrice.
] to start setting.
] to switch between KMH and MPH.
] to return to the main page.
06