Publicidad
Idiomas disponibles
Idiomas disponibles
Installation location
1. Ventilation condition
The position you select for the refrigerator installation should be well-ventilated and has
less hot air. Do not locate the refrigerator near a heat source such as cooker, boiler, and
avoid it from direct sunlight, thus guaranteeing the refrigeration effect while saving
energy consumption. Do not locate the refrigerator in the damp place, so as to prevent
the refrigerator from rusting and leaking electricity. The result of the total space of the
room in which the refrigerator is installed being divided by the refrigerant charge amount
of the refrigerator shall not be less than 8 g/ M³.
Note: The amount of refrigerant charged for the refrigerator can be found on the
nameplate.
2. Heat dissipation space
When working, the refrigerator gives off heat to surroundings. Therefore, at least 30mm
of free space should be spared at the top side, more than 100mm on both sides, and
above 50mm at the back side of the refrigerator.
Dimensions in mm
W
D
700
700
Note ： Figure 1, Figure 2 only as a product space demand size schematic diagram.
Level ground
Place the refrigerator on the solid and flat ground (floor) to keep it stable, or else, it will
give rise to vibration and noise. When the refrigerator is placed on such flooring
materials as carpet, straw mat, polyvinyl chloride, the solid backing plates should be
applied underneath the refrigerator, so as to prevent color change due to heat
dissipation.
PREPARATIONS FOR USE
H
1855
A
B
1147
1359
English-7
C(°)
E
130±5
50
F
100
Publicidad
