GRILL MEISTER GGW 84 A1 Manual De Instrucciones página 25

Step 4
 Slide the axle (12) through the bottom hole of the wheel legs (13). Now place the wheels (11)
onto the ends of the axle (12). Hand-screw the cap nuts (21) onto the ends of the axle (12).
Then, using two size 13 open-ended spanners, simultaneously screw both cap nuts (21) tightly
into place.
Step 5
 Hand-screw the three parts of the wind guard (1, 2, 3) together using the top holes. When
screwing the parts together, ensure that the holes in the wind guard (1, 2, 3) are facing
downwards (as shown in the illustration). You will need two screws (18), two washers (22) and
two nuts (20).
 Screw the wind guard (1, 2, 3) to the charcoal basket (5) from the inside. Always ensure that
the heads of the screws face outwards. You will need five screws (18), five washers (22) and
five nuts (20).
 Now tighten all the screws.
GRILL MEISTER GGW 84 A1
English - 23