Publicidad
Idiomas disponibles
Idiomas disponibles
POWERING OF THE DEVICE
Before starting work with the device, install the power supply. To do this, you need
to:
a) Remove the battery cover located on the back of the device.
b) Insert batteries in accordance with polarity indicators.
c)
Cover the batteries by attaching the cover.
The clock will appear on the display once the batteries have been correctly installed.
You can start working with the device.
CAUTION!
CAUTION!
installed, check the correctness of installation and the battery charge level!
CAUTION! If the low battery icon
irrigation process will be stopped! Replace the power supply! After opening the
battery compartment and removing batteries, wait 60 seconds until the screen
goes blank! Then you can install new power supply!
CONNECTING THE WATER CONNECTION
a) After properly connecting the power supply to the unit, install a ¾ inch water
connection. Attach the water inlet to the connector on the bottom of the
device. Do not damage the filter located in the ¾ inch connector while
connecting the water supply.
3.3. Working with the unit
3.3.1.
TIME AND DATE SETTINGS
a) To set the clock, select the MENU button. TIME will start flashing on the display
screen. Confirm with the OK button. The device will turn to clock settings.
b) The clock will appear; the hour will be flashing. To set the real time, turn the
timer selection dial (left, right) to adjust the value. Confirm with the OK button.
The device will move to the minute settings.
c)
Proceed in the same way to set the minute value.
d) After confirming the minute settings, the device will automatically proceed to
define the day of the week. By turning the timer dial, adjust the day of the
week and confirm with the OK button. The clock settings will be saved.
Do not use rechargeable batteries to power the device!
If the device does not turn on after the power supply has been
appears on the LCD screen, the
Publicidad
