hillvert HT-IRI-05 Manual De Instrucciones página 19

d) The device will move to the watering frequency settings. Select the days of
week and the watering interval of 6 or 12 hours. The device is set using LEFT
and RIGHT buttons. When selecting days of the week or the time, each time
confirm with the OK button. The flashing drop symbol indicates irrigation.
e) After defining the operating frequency, the device will activate the program.
Using the dial, set the program value to ON – irrigation on, or OFF - irrigation
off.
3.3.3. MANUAL CONTROL
The manual control mode is based on one-time, continuous irrigation. It takes place
without interfering with previously saved system settings. In order to set the
operation of the device:
a) On the device's panel, select and press the MAN switch.
b) Use the selector dial to set the required operating time for the system. Confirm
with the OK button. The device will starts operating immediately.
c) The declared manual function can be stopped by selecting the MAN switch on
the device panel.
d) The set operation time of the device can be postponed by 0-7 days. To do this,
select and press simultaneously the LEFT and RIGHT switches. The number "0"
will be flashing on the display screen. Set the delay value using the dial.
Confirm with the OK button.
e) If the declared value is incorrect or the delay in starting the device operation
must be cancelled, press the LEFT and RIGHT switches simultaneously. The
saved value will be reset.
3.4. Cleaning and maintenance
a) Use only non-corrosive cleaning agents for cleaning the surfaces.
b) Perform regular inspections of the unit checking technical fitness and any
damages.
c) Use a soft cloth for cleaning.
d) Do not leave the batteries in the device when it will not be used for a long time.