Descargar Imprimir esta página

Becken BDD4869 Manual De Instalación página 17

Publicidad

Idiomas disponibles

Idiomas disponibles

• To get the best energy efficiency out of this product, position all
shelves and drawers on their original position as show above.
• To remove a drawer, please turn the wire shelf under the drawer up
and down 180 degrees to get the best energy efficiency.
Display controls
The control panel that controls the temperature inside the freezer
compartment is located inside the freezer. Use your appliance
according to the following control regulations. Your appliance has the
corresponding functions and modes as the control panel showed in the
picture below. When the appliance is powered on for the first time, the
icons on the display panel will be backlit. When the doors are closed,
the backlight will turn off.
2.2. Product usage
Installing the appliance
Before using the appliance for the first time, you should review the
following tips.
Ventilating the appliance
In order to improve the cooling system's efficiency and save energy,
it is necessary to maintain a good ventilation around the appliance for
the dissipation of heat. For this reason, sufficient clear space should be
available around the refrigerator.
It is advisable to keep at least a 50-70mm space between the back of
the appliance and the wall, at least 100 mm from its top, at last 100 mm
between the sides and the walls and a clear space in front to allow the
doors to open 135°. Please see the following diagrams.
Upright Freezer | Congelador Vertical | Arca Vertical
EN
17

Publicidad

loading