Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
Probable Cause
Dirty or clogged air passages
Insufficient air supply
Air leakage
Worn/damaged wear & tear parts
Tool matching
TECHNICAL DATA
Clamping unit size:
Free speed:
Air inlet:
Working pressure:
Air consumption:
Sound pressure level (LpA):
Sound power level (LwA):
Vibration level (ahd):
Vibration level (k):
Recommended hose:
Length:
Net weight:
ENVIRONMENTAL PROTECTION
Recycle unwanted materials instead of disposing of them as waste. Packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with
the environment. Contact your local solid waste authority for recycling information.
Dispose of this product at the end of its working life environmentally.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
(Insufficient power)
Flush and lubricate tool, drain air tank and supply line
Increase line pressure, make sure compressor matches
tool's air pressure and consumption needs
Use teflon tape at all fittings and joints.
Check tool for worn or damaged o-rings & seals.
Replace as necessary
Be sure you are using a tool suited for the sanding
requirements of the job at hand.
8 mm
Control lever position
1
2
3
1/4"
6.2 bar (90 psi)
99.1 l/min (3.5 cfm)
90.4 dB (A)
101.4 dB (A)
3.55 m/s²
0.18 m/s²
10 mm (3/8") inner diameter
200 mm
1.8 Kg
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
Solution
Control ring position
H
1200 U/min
1800 U/min
2400 U/min
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
L
450 U/min
700 U/min
900 U/min
Publicidad
