BGS technic 70915 Instrucciones De Uso página 7

CONTENTS
1 Hole cutter (25mm)
2
Adjustable G-clamp
3 Air tool oil bottle
4 Air tool
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.
INTENDED USE
This air tool is a compact but powerful spot weld cutter that is operated via the workshop compressed
air supply and is suitable for use in vehicle workshops. The pneumatic tool has a three-stage
adjustable speed / torque control and a 2-speed gearbox for further reducing the speed, which is
particularly advantageous for high-strength steel and aluminum alloys in modern car body
construction. The removable G-clamp is useful for removing spot welds along an edge. This results in
quick removal of the spot welds without the use of a center punch. The set includes a spot weld cutter
(8mm) and a hole cutter (25mm) for removing larger spot welds.
SAFETY INFORMATIONS
When using pneumatic tools, fundamental precautionary measures must always be ensured in order
to reduce the risk of personal injury and property damage.
• Keep children and unauthorised persons out of the work area.
• Do not let any children play with the tool or its packaging.
• Make sure that the work area is sufficiently illuminated.
• Keep the work area clean, organised, dry and free from other materials.
• Do allow untrained persons work with this tool set.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Air Spot Weld Drill Set
5
6
7
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
Air nipple
Allen key (3mm)
Spot weld cutter (8mm)
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
BGS 70915