blocked, or otherwise interfered with.
Switch on the popcorn maker. After a
few moments the continuous popping
will automatically feed popcorn from
the aluminium heating chamber out
through the spout until all has popped.
This process will take about 2-3 minutes.
Turn off the popcorn maker and remove
the plug from the wall when popping
has ceased.
If more popcorn is required, remove the
popcorn remaining in the aluminium
heating chamber. Pay attention to not
get burned when handling the top cover
as this part as well as the measuring cup
is very hot when the popcorn maker is
in use.
NOTE: Wait for approx. 10 to 12 minutes
before using the popcorn maker again.
Replace the measuring cup into position
inside the top cover after every use.
CLEANING AND MAINTENANCE
Before cleaning, remove the plug from
the wall.
Make sure the popcorn maker has
cooled down completely before clean-
ing.
Clean the plastic parts of the popcorn
maker with a damp cloth. Never use
abrasive products as they could damage
the popcorn maker.
The top cover and the measuring cup
can be cleaned in warm soapy water
When the popcorn maker is not in use,
disconnect the popcorn maker and store
in a safe, dry place, out of the reach of
children.
You can put the
measuring cup 1 and
top cover 2 in the
dishwasher.
1
2
20