Publicidad
Idiomas disponibles
Idiomas disponibles
d)
Keep the product in good working order. Check before each use for general damage or damage to
moving parts (cracks in parts and components or any other condition that may affect the safe operation
of the device). If damaged, have the device repaired before use.
e)
Keep the product out of the reach of children.
f)
Repairs and maintenance should be carried out by qualified personnel using only original spare parts.
This will ensure the safety of use.
g)
To ensure the designed operational integrity of the device, do not remove factory-installed covers or
loosen screws.
h)
When transporting or moving the device from storage to the place of use, observe the health and safety
rules for manual handling applicable in the country where the device is used.
i)
Avoid situations in which the device stops under heavy loads during operation. This can cause
overheating of the drive elements and consequent damage to the equipment.
j)
Do not leave the device switched on unattended.
k)
Clean the device regularly to prevent permanent dirt build-up.
l)
The product is not a toy. Cleaning and maintenance must not be performed by children without adult
supervision.
m) Do not tamper with the device to alter its performance or design.
n)
Keep the unit away from sources of fire and heat.
CAUTION! Although the product has been designed to be safe and has adequate safeguards
and despite the additional safety features provided to the user, there is still a slight risk of
accident or injury when handling the product. Caution and common sense are advised when
using the product.
3.
Instructions for use
The pipe cleaning machine is intended for only clearing clogged pipes and drains. It can be used in closed
rooms and, during favorable weather conditions, outdoors. It is forbidden to use the machine in conditions
of high humidity, as well as during rain/snowfall.
The user is responsible for any damage resulting from misuse.
3.1.
Preparation for operation
POSITIONING OF THE UNIT
The ambient temperature must not exceed 40°C and ambient humidity should not exceed 85%. Place the unit
in a way that ensures good air circulation. Maintain a minimum clearance of 10 cm from any wall of the unit.
Keep the unit away from any hot surfaces. Always operate the unit on a level, stable, clean, fireproof and dry
surface and out of the reach of children and persons of impaired mental, sensory and intellectual functions.
Place the unit in such a way that the mains plug can be reached at any time. Ensure that the power supply to
the unit corresponds to that specified on the identification plate!
3.2.
Working with the unit
Publicidad
