Publicidad
Idiomas disponibles
Idiomas disponibles
Origial user manual FUXTEC FX-LBS126P_de_en_fr_ita_es_rev13
31.
Commissioning - refuelling, 2-stroke engine oil
The device is not delivered filled with fuel mixture.
Fill the device as described in this chapter under "Refuelling".
The device is operated with a 40:1 mixture of normal petrol (unleaded) and two-stroke
engine
oil.
When handling petrol, increased attention is required. Avoid smoking and naked
flames at all costs because of the danger of explosion.
Gasoline:
Octane number at least 91 RON, lead free
•
Do not fill with leaded petrol, diesel or other non-approved fuels.
•
Do not use petrol with an octane number lower than 91 RON. This can lead to engine
damage due to increased engine temperatures.
•
If you work continuously in the higher speed range, use petrol with a higher octane rating.
•
For environmental reasons, the use of unleaded petrol is recommended. The use of E10
fuels is not permitted.
2-stroke engine oil
Do not use four-stroke or two-stroke oils for water-cooled outboard engines, or
ready-mixed fuel from petrol stations.
Mixing ratio 40:1
Gasoline
1 litre
2 litres
•
Ensure that the oil quantity is measured exactly, as a small deviation in the oil quantity has a
strong effect on the mixing ratio for small quantities.
•
Do not change the mixing ratio, as this will result in increased combustion residues,
increased fuel consumption and reduced performance, or damage to the engine.
Mix the petrol and oil in a clean, petrol approved and marked container with overfill protection.
1. First fill in half of the petrol to be mixed
2. Then fill in the entire quantity of oil.
Two-stroke engine oil
(40:1)
0.025 litres
0.050 litres
Two-stroke engine oil
Gasoline
5 litres
0,125 litres
10 litres
0.250 litres
(40:1)
39
Publicidad
