iOttie Easy One Touch Wireless 2 Manual Del Usuario página 5

1. Attach the mount cradle to the
ball joint.
Choose an installation method: Dashboard/Flat Surface (A) or
Windshield/Curved Glass (B).
[ Option A ]
Dashboard or Flat Surface Installation
Choose a flat location on the vehicle's dashboard and wipe
the surface clean.
1. Peel off the film on 2. Peel off the protective
the dashboard pad film on the suction cup
& stick onto the and press mount firmly
desired installation onto the dashboard pad.
location.
2. Tighten the cradle knob.
3. Push the locking lever
down to engage suction.
[ Option B ]
Windshield or Curved Glass Installation
Choose a location on the windshield and wipe any dust or debris from
the surface.
1. Peel off the protective film on the
suction cup and press firmly onto
the windshield.
When removing the dashboard pad, please use caution. We recommend
removing slowly from the edge to avoid damage.
We do not recommend using the dashboard pad for windshield mounting.
To reuse the suction cup, simply rinse under warm water and let air dry
to restore tacky suction.
Connecting to Power
The Easy One Touch Wireless 2 is powered via a micro USB cable.
There is no on/off switch on the mount. Once it is plugged in, the
mount will remain on until the vehicle is turned off.
2. Push locking lever down to
engage suction.