Directions For Use (Gb); Installation - Qlima ASE 1020 Manual De Funcionamiento

1. DIRECTIONS FOR USE (GB)

G
• Read this user manual carefully before using the appliance and keep it for future reference. Install
this device only when it complies with local/national legislation, ordinances and standards.
• The device is designed for indoor use only. It is intended to be used as a cool ash vacuum cleaner for
cool (≤ 40° C) dry ash only and only to be used as such in normal household conditions. Never vacuum
places where there is risk of vacuuming ashes or residue hotter than 100 ºC (> 10 seconds). Only vacu-
um the following substances: cold ashes from fire place, wood/coal stoves, ash trays, grills, BBQ
• After unpacking, check the appliance for any damages. When in doubt, do not use the appliance, but
contact customer service at your local dealer's. Keep the packaging materials (plastic bags, etc.) away
from children, as they may cause hazardous situations to children.
• No modifications to the safety system are allowed.
• This appliance is constructed in conformity with relevant texts in the EN 60335 standard wherever ap-
plicable.
WARNINGS
• Read the Directions for Use before using the appliance. The safety of this appliance is guaranteed
only by its correct usage in accordance with these instructions, therefore it is recommended that they
are retained for future reference.
• Only use the device for its intended purpose. Other usage may lead to short circuits, burns,
electroshocks, lamp explosion, crash, etc.
• Install the appliance only if it complies with local regulations, laws and standards;
• Make sure that the available voltage does not exceed the voltage stated in the specifications of this
manual.
• Check if the voltage indicated on the type plate corresponds to the local mains voltage before you
connect the appliance.
• The appliance is suitable for mains voltages ranging from ~230 V.
• Always make sure that you actually see the appliance when you want to switch it on. Never use
things like a timer, programmer or any other device (including Internet apps) that switches on the
appliance automatically as this may cause fire!
• Use the appliance according to the instructions as described in this manual.
• This appliance is manufactured according to CE safety standards. Nevertheless, as with any other
electrical device, care must be taken;
• RISK OF FIRE Never use the appliance in places where inflammable and/or harmful Gases, products or
fumes may be present (e.g. exhaust Gases, paint fumes, curtains, paper, clothes);
• Do not use any extension cords or multi-socket adapters.
• For safety reasons take care when children or animals are in the proximity of the appliance, as with
any other electrical device.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible for their safety.
• If the supply cord is damaged, it shall be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
• Children should be supervised to ensure that they do not play with the appliance.
• In order to avoid overheating, do not cover the device.
• Do not use this appliance in the immediate surroundings of a bath, a shower or a swimming pool.
• Make sure that the power cable can never touch the heater.
• Do not insert objects into the openings of the device.
• This appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the appliance in a safe way and understand the hazards
involved.
• Cleaning and user maintenance shall not be made by children without supervision.
• Children of less than 3 years should be kept away unless continuously supervised.
22
• Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that
it has been placed or installed in its intended normal operating position and they have been given
supervision or instruction concerning use of the appliance in a safe way and understand the hazards
involved.
• Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance
or perform user maintenance.
Disconnect from mains during installation, maintenance and cleaning. and/or filter replacement.
• Do not remove the plug from the socket by pulling the power cord.
• Only have the appliance repaired by the manufacturer or its authorized service agent
• Only use filters supplied by the manufacturer or its authorized service agent.
• Do not vacuum soot
• Do not use the appliance to vacuum: liquids, inflammable and/or explosive materials, corrosive
materials, hot and/or burning ash, matches, cigarettes.
• Do not open the motor compartment of the appliance. DANGER ! Live electrical parts!
• NEVER use the appliance without the filter!
• Empty and clean the appliance before vacuuming to avoid the collection of materials that could pose
a fire hazard inside the vacuum cleaner;
If you fail to consult and/or follow up the rules, instructions and explanation, the warranty will no
longer be valid, and the manufacturer will no longer deal with any damage to the appliance and/or
your environment under the warranty.

2. INSTALLATION

(refer to picture 1 and 2 page 3):
• Take out the appliance and accessories from the packing box, check the accessories and whether the
appliance enclosure is well-found or not. (picture 1 and 2)
• Loose the lock 3 and take the head part from the container 1.
• Attach the filter (ASE 1020: item B / ASZ 1010 item C / ASZ 1020 item C+D) set to the bottom of lid 3
• Put the lid 3 on the container 1 and use the lock 2 to fixate.
• Insert the nozzle 8 into the hose 7. Insert the other end of hose 7 into air inlet connection 6.
• (ASZ1020 only): click the wheels 11 firmly to the bottom of the container body 1. Make sure that
wheels 11 are evenly spread (see picture 2 )
• The nozzle 8 end rectangular nozzle 10 (picture 1 & 2): are used to vacuum ash in the fireplace (picture
5)
• Type ASZ only: Insert the power cord plug in the wall socket.
• Type ASE only: connect the hose of your normal home dust vacuum cleaner to suction connector 5
(picture 1). Connect your vacuum cleaner to mains and switch it on.
NOTE:
* the normal directions for use of your home dust vacuum cleaner remain applicable, the supplier of
your ASE ash vacuum cleaner is not responsible in any way for your home dust vacuum cleaner. No
claims can be made whatsoever.
* always make sure the ash vacuum cleaner filter is properly installed. As otherwise your home dust
vacuum cleaner might be damaged.
The Ash Vacuum cleaner is now ready to use.
BLOWING FUNCTION: ASZ 1010 AND ASZ 1020 ARE FEATURED WITH A BLOWING FUNCTION:
• Put hose end 7 into the blower outlet connection 13. The air will now blow through the nozzle.
23