Craftsman 919.751110 Manual Del Propietário página 13

IMPORTANT: While inflating objects
the pressure gauge will not read
correctly. Sometimes the gauge
will read very high. Turn the unit
"off" and allow the needle to settle,
this will provide an approximate
reading. Stop and check the
pressure reading frequently when
inflating.
How to Inflate Tires
1. Place the universal valve adapter
over tire valve stem.
2. Press lever on universal valve
adapter down to lock in place.
Objects. Over inflating tire could
cause the tire to burst or the
universal valve adapter to pop
off the valve stem and become
a projectile. Use a tire pressure
gauge to ensure an accurate tire
pressure reading, because the
pressure gauge on the unit is for
general reference only.
3. See "How to Start" instructions
to start inflator.
How to Inflate Sport Balls
with no initial air will fill in less
than 10 seconds. Watch sport
balls carefully while filling, do not
overfill.
1. Place inflator needle into the
universal valve adapter and press
lever on universal valve adapter
down to lock in place.
2. Insert inflator needle into sport
ball to be inflated.
Risk of Flying
Objects/Bursting
Risk of Bursting.
Most sports balls
How to Use Your Unit
How to Stop:
1. Set the On/Off switch to "OFF".
NOTE: When the unit has been
turned off, it is normal to hear a short
hiss of air being released.
Before Starting:
1. Place On/Off switch to "OFF".
2. Attach inflation needle,
extension nozzle, or high flow
inflator/deflator adapter body to
universal valve adapter.
3. Insert inflation needle, extension
nozzle, or high flow inflator/
deflator adapter body with
desired nozzle into inflatable.
pressure causes a hazardous
risk of bursting. Check the
manufacturer's maximum pressure
rating for objects being inflated.
Carefully follow the "How to Start"
instructions.
13- ENG
Risk of Bursting.
Too much air
A10087