Descargar Imprimir esta página

Worx Nitro HYDROSHOT WG633E Manual De Instrucciones página 16

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 55
3. TECHNICAL DATA
Type: WG633E WG633E.X (620-649 - designation
of machinery, representative of battery-powered
washer)
Voltage
Allowable pressure
Max****
Rated pressure
Max water flow rate
Max. inlet water
pressure
Suction height Max
Protection degree
Water temperature
Weight (Bare tool)
** X=1-999,A-Z,M1-M9 there are only used for
different customers, there are no safe relevant
changes between these models.
*** Voltage measured without workload. Initial
16
battery voltage reaches maximum of 20 volts.
Nominal voltage is 18 volts.
****Allowable pressure is checked by the following
test: The pressure is increased to 110% of the allowable
pressure, or by 1,5 Mpa for unheated machines, and the
device shall operate.
NOISE DATA
A weighted sound pressure
K
pA
A weighted sound power
K
wA
Wear ear protection when sound
pressure is over 80dB (A)
VIBRATION INFORMATION
Typical weighted
vibration
WARNING: The vibration emission value during
2 in 1: Portable Power Cleaner/
Water Sprayer
WG633E WG633E.X **
20 V
Max***
5.6 Mpa
3.8 Mpa @high
2.5 Mpa @Eco
220 L/hr
0.6 Mpa
1.5m
IPX5
Max 40°C
1.54kg
L
: 78.3dB(A)
pA
3.0dB(A
L
: 89.3dB(A)
wA
3.0dB(A)
a
<2.5m/s
K= 1.5m/s
2
2
h
actual use of the power tool can differ from the
declared value depending on the ways in which the
tool is used dependant on the following examples
and other variations on how the tool is used:
How the tool is used.
The tool being in good condition and well maintained
Using the correct accessory for the tool and ensuring
it is in good condition.
The tightness of the grip on the handles and if any
anti vibration accessories are used.
And the tool is being used as intended by its design
and these instructions
.
This tool may cause hand-arm vibration syndrome if
its use is not adequately managed
WARNING: To be accurate, an estimation of
exposure level in the actual conditions of use
should also take account of all parts of the operating
cycle such as the times when the tool is switched off
and when it is running idle but not actually doing the
job. This may significantly reduce the exposure level
over the total working period.
Helping to minimise your vibration exposure risk.
Maintain this tool in accordance with these instructions
and keep well lubricated (where appropriate)
If the tool is to be used regularly then invest in anti
vibration accessories.
Plan your work schedule to spread any high vibration
tool use across a number of days
.
SUGGESTED BATTERIES
AND CHARGERS
Category
Type
20V Battery
WA3014
20V Charger
WA3880
We recommend that you purchase your accessories
from the same store that sold you the tool. Refer to
the accessory packaging for further details. Store
personnel can assist you and offer advice.
4. INTENDED USE
This tool is intended for cleaning and watering.
Capacity
4.0 Ah
2.0 A
EN

Publicidad

loading

Este manual también es adecuado para:

Hydroshot wg633e.xHydroshot wg633e.9