AENO RC1S Guia De Inicio Rapido página 15

2. The vacuum cleaner does not charge. Possible causes and solutions: Make
sure that the power adapter is plugged in, and that the docking station LED
is flashing white. Clean any dirt from the metal contacts of both the charging
station and the vacuum cleaner with a dry and soft cloth. Charge the vacuum
cleaner directly from the power adapter, i.e. without the docking station.
3. The vacuum cleaner does not connect via Wi-Fi, or the vacuum cleaner does not
operate in 5GHz Network. Possible causes and solutions: Make sure your router
supports 2.4 GHz signal. Place the vacuum cleaner and the smartphone next to the
router and try to connect again. Check if AENO app is installed. Check if the vacuum
cleaner is being correctly connected to the app.
4. The remote control does not work. Possible causes and solutions: Replace batteries.
Make sure the distance between the remote control and the vacuum cleaner is no
more than 5m, and that the power switch ⓮ is turned on.
5. The vacuum cleaner does not work on schedule. Possible causes and
solutions: Make sure the power switch ⓮ is turned on, and that the vacuum
cleaner is charged and does not get stuck. If you restart the vacuum cleaner,
the schedule will be canceled. So, set the schedule again in the AENO app.
6. The vacuum cleaner returns to the docking station before the end of
cleaning. Possible causes and solutions: The vacuum cleaner returns to the
docking station automatically when the battery level is less than 20 %.
Recharge the vacuum cleaner. Restart the device using the power switch ⓮.
7. The vacuum cleaner moves back, and does not clean some areas. Possible
causes and solutions: Avoid dark surfaces on the way of the device, and
remove dark carpets or fabrics from the floor, and shade windows in bright
sunlight, and wipe the infrared sensors and the bumper with a soft cloth at
the front part of the vacuum cleaner.
8. The suction power has decreased. Possible causes and solutions: Clean the
dust container, all filters, the roller brush and the suction inlet.
9. The vacuum cleaner suddenly stops operation. Possible causes and
solutions: Check that the battery is charged, and that the vacuum cleaner
does not get stuck. Make sure that the vacuum cleaner is in the "Area
15 aeno.com/documents