Publicidad
Idiomas disponibles
Idiomas disponibles
FRONTAL
1
2
3
4
1. Hinge
2. Fridge body
3. Shelf
• Do not tilt the refrigerator for more than 45° from upright when moving it. Do not apply
force to any part such as the condenser, the door and its handle in order to prevent the
refrigerator from deforming, or else its performance will be influenced.
• Ensure that there is enough space around the refrigerator in order to let it work well.
• The refrigerator should be kept away from high temperature, sunshine or humid conditions.
1. When operating the refrigerator for the first time, set the thermostatic dial at 3, connect
the electric wire and run it without loading any food. Usually this takes 2 or 3 hours. Then
set the thermostatic dial at the desired setting and place food into the refrigerator.
2. The temperature of the refrigerator can be adjusted by turning the thermostatic dial. Set-
ting the thermostatic dial at 3 - 4is the most suitable for general operation. When the ther-
mostatic dial number is higher, the refrigeration capability is stronger.
3. Do not put too much food in the refrigerator. Open the door less in order to maintain the
temperature of the refrigerator and save on electricity consumption.
4. The refrigerator can defrost automatically. Defrost the freezer whenever the layer of frost
on the surface reaches 3 or 4 mm. When defrosting, remove all food, set the thermostat
at 0 position and open the door. After the frost has melted, discard the water and dry up
the interior of the refrigerator. It can be then restarted by turning its thermostat to the
desired setting.
5. When the ambient temperature is less than 10 °C, turn on the compensate switch in order
to avoid the compressor being off for long time. When the ambient temperature is over
10 °C, please turn off the compensate switch to save energy. This is an optional function
only for some models.
PARTS LIST
4. Paws
5. Door
6. Top shelf
INSTALLATION
OPERATION
REAR
5
6
8
7
7. Door bottom shelf
8. Thermostat
E NGLI SH
7
Publicidad
