Auchan 600138127 Manual De Instrucciones página 19

6. USE
6.1 CHARGING
Never charge the appliance when the temperature is below 0ºC or above 40ºC.
Only indoor use!
Never operate the charger with a damaged power cord or power plug. Damaged cord or plug
can result in danger to life due to electric shock.
The device cannot be used while it is being charged.
Note:
1) Your cordless screwdriver tool has not been fully charged at the factory.
2) Press the button (7) to check the battery capacity indicator,
RED：power less than 30%

RED+YELLOW：power 30-60%

RED+YELLOW+GREEN： power more than 60%

3) Charger was not included in package, you can choose a charger with Micro-B terminal as per the
technical data listed in specifications.
Before using first time, charge the screwdriver's battery.
a. Insert the charger USB plug into the charging socket (11) and plug the charger into a
100-240V/50Hz electrical outlet.
b. During the charging process, the RED indicator is on, the green indicator will be on after full
charging.
c. The battery cell is incorporated in the handle and must not be removed to be charged.
6.2 INSERTING THE BIT
1) Insert a screwdriver into the tool holder(2) as far as it will go.
2) If using standard end caps or interchangeable head caps, use an additional tool holder.
3) Before turning on the screwdriver, firmly place the screwdriver bit on the screw and position the switch
so that the screwdriver rotates in the desired direction, press the Front / Rear Switch to operate the
screwdriver.
4) Never use the screwdriver when the ambient temperature over
6.3 LEFT/RIGHT
To drill/fix screws, press the R button(5) and the screwdriver will rotate to the right.
To unsrew screws, press the L button(5) and the screwdriver will turn to the left.
6.4 GRIP HANDLE ROTATION
Your screwdriver has grip handle rotation function, Press the grip handle rotation button(6) to rotate the grip
handle(12) to straight direction.
6.5 MANUAL OPERATION
Your screwdriver has an automatic "axis locking" function. This allows you to use it as a 'manual' screwdriver
to undo very tight screws.
40ºC
19