Publicidad
ATTENTION! Follow exactly the instructions and sequence for assembling the product, described
in the text and illustrations attached to the instructions.
1. Assembling the side frames (legs) of the crib: Take a set - one plastic joint and two side frames
(legs) as shown in figure 1. Insert the both sides of the frames into the holes of the plastic
connector and fix them in the direction of the arrow, as indicated in figure 2. The spring pin will
snap into place once it is securely fastened on both sides (see figure 3). The same operation is
performed to assemble the other set of side legs.
2.Attaching a fabric basket to the legs of the crib: Take two support tubes and thread them
through the holes in the fabric basket (see figure 4). Attach the fabric basket frame to the crib
legs by securing each side of the frame in the indicated bottom holes using bolts (see figures 5,
6, 7 and 8). In the same way, fix the other two support tubes by fixing them in the upper holes
of the legs of the crib through bolts (see figures 9, 10, 11 and 12).
3.Installing the crib basket: Place the two support frames into the holes of the crib basket (see
figure 13), then install the crib basket support frame to the plastic joint as shown in figures 14,
15, 16 and 17 Place the mattress in the crib with the soft side up. Attach the mattress to the
base (see figure 18).
4. Placing the mosquito net - The mosquito net is fixed with tic-tac buttons on the side of the
bed.
INSTRUCTIONS FOR MAINTENANCE AND CLEANING
Clean the plastic or metal parts of the product with a soft cotton cloth or sponge moistened with
water or a mild detergent. Do not use bleach, agressive detergents or abrasive products to clean
the product. All textile parts and fabrics should be washed only by hand, following the
instructions on the label. After cleaning, allow the crib to dry well before using it. Do not fold or
remove the crib before it is completely dry. Do not expose the product to direct sunlight for
extended periods of time and to extreme temperatures that may change color and damage
exposed parts. After prolonged exposure to high temperatures, wait a few minutes before
placing the child in it. Do not place objects in or on the product to avoid damaging the structure
and / or upholstery. Store the product in a clean and dry place.
Manufactured for Moni in PRC,
Manufacturer and Importer: Moni Trade Ltd.
Address: Bulgaria, Sofia, Trebich, 1 Dolo Str.,
Phone number: 003592/936 07 90,
Website: www.moni.bg
14
Publicidad
