Publicidad
Idiomas disponibles
Idiomas disponibles
REEL MOWER OPERATOR'S MANUAL
Engine Operation
A variety of engines are used on the California Trimmer
Reel Mowers and their specific identification is provided
as the last part of the overall unit's model number.
Example as follows: RL207H-GX120 (GX120 is the
engine model no).
Review the complete operation and safety
instructions provided in the owner's manual of the
respective engine manufacturer – which is included
in the information packet of this unit. NOTE: Any
service, warranty or replacement parts issues for the
engine must be directed to Authorized Service
Dealers of the respective manufacturer.
Operating Controls
1. Clutch Lever
This initiates both the roller and reel cutting blade
rotation. Squeeze the lever until engagement occurs
and release to stop.
Do not start the engine while squeezing clutch lever.
2. Drive Roller Engagement
The drive roller propels the unit when it is lowered on
to the ground. Once the engine is started and the
clutch is engaged, the drive roller will be rotating.
Always move the lift lever into the disengaged
position when stopping. Begin pushing the unit
forward as the drive roller is lowered to the ground.
Evergreen Turf Equipment, LLC • 1028 4
3. Engine Stop Switch
Reduce the engine speed using the throttle
lever, lift the drive roller and release the clutch
lever before stopping the engine. Never stop the
engine while the unit is moving or blades are
rotating.
- Briggs & Stratton model 550
- Honda model GX120/160
4. Throttle Lever
The throttle lever controls the engine speed – as well as
the blade and drive roller speed.
Pivot the lever right to increase, to the left to decrease
On some units, the throttle also controls the engine stop
switch as indicated previously.
St. SW, Bldg. A • Auburn, Washington 98001 • caltrimmer.com
th
(RL205HC & RL207H/HC)
It is located on the right side of the engine
It is located on the front side of the engine.
EN
Page 5
Publicidad
