Digital Check SmartSource Micro Elite Guia De Configuration Rapida página 3

Scanner Access Points
The scanner is fitted with two covers
to provide access to the track mechanism and image cameras.
Image
Cover
Scanner Maintenance
•
As required, the scanner should be cleaned to remove
accumulated paper dust and debris deposited by the documents
• A check scanner "cleaning card" can be run through the scanner
to perform a "rapid cleaning" process:
• Cleaning Mode:
Tap the power button down 3 times to
engage Cleaning Mode (LED Turns purple)-insert cleaning card
into feed hopper. Cleaning card automatically scrubs the track.
LED color returns to its prior state after cleaning process is
complete, then scanner is ready to process.
As needed, Use the check scanner
cleaning card to clean/ clear the
track
•
A more detailed cleaning of the scanner may be necessary if
the cleaning card does not provide suitable results
8227 5002-003 September 2019 (Rev 093019)
SmartSource Micro Elite – Access and Maintenance
Track
Cover
© 2019 Digital Check Corp.
Recommended Track Cleaning Procedure
Open both of the scanner covers
Check the paper path and
remove all bits of paper,
paper dust, paper clips, and
staples from the track
Use a Micro-duster to blow air
along the track to clean the paper
path
Page 3 of 16