cecotec FAST&FURIOUS 5060 ULTRA Manual De Instrucciones página 21

ENGLISH
Spray
The spray function can be used with any temperature setting during the steam ironing or dry
ironing mode, as long as the tank is full.
Press the spray button a couple of times to dampen clothes.
Self-cleaning
Make sure the appliance is unplugged and the steam knob to the 0 position.
Fill the water tank up to the maximum mark and close it.
Select the maximum temperature mode.
Connect the appliance to the power supply.
Unplug the appliance when it reaches the temperature.
Holding the iron horizontally, turn the steam knob to the maximum position, press the self-
cleaning button and gently shake the device. Place a container or a bowl beneath the iron.
The soleplate will emit boiling water and steam to remove all impurities.
Repeat this process if necessary.
After the self-cleaning process, plug in the device again and let the iron heat up to allow the
soleplate to dry.
Unplug the iron when it has reached the set ironing temperature, move the hot iron gently
over a piece of used cloth to remove any water stains that may have formed on the soleplate
and let it cool down before storing it.
Recommendation: Carry out the auto-clean cycle once every 2 weeks. When excessive
limescale is observed, carry it out more frequently.
Auto shut-off function
The iron will automatically turn off when it is placed and kept still horizontally 30 seconds, or
vertically for 8 minutes.
Type of fabric and temperature knob position
Warning: Fig. 2 This symbol in the label means the item is not suitable for ironing.
Label indications Type of fabric
Fig. 3 Nylon/Silk
Fig. 4 Wool
Fig. 5 Cotton
Linen
40 FAST&FURIOUS 5060 ULTRA
Temperature knob
Fig. 6
4. CLEANING AND MAINTENANCE
Turn off, unplug the appliance from the power supply, empty the water tank (do it after each
use) and allow it to cool down completely.
In case fabric is adhered to the soleplate due to heat, use a damp cloth and vinegar to detach
it.
Do not use abrasive cleaners or scouring pads to clean the product.
If scale blocks the steam holes, use a toothpick to remove it.
To protect the soleplate while it is stored, place the steam iron in an upright position on its
heel rest.
Outside surface of the iron
After unplugging and letting the iron cool down, wipe its exterior surface with a damp cloth
and, if necessary, a mild detergent.
Warning: Do not use any abrasive cleaning agent.
Soleplate
Starch and other types of residue may be easily removed from the soleplate with a damp
cloth. To avoid scratches on its finish, do not use metallic scouring pads to clean the
soleplate and never place the iron on a rough surface. If synthetic fabrics are ironed at high
temperature, both the fabric and the soleplate of the iron could be damaged. The best way to
remove synthetic residue from the soleplate is to heat it up and iron over an old cotton rag.
Warning: Do not use steam iron cleaners in this iron, since they could damage its parts.
Storage
Disconnect the iron from the mains supply.
Empty the tank by turning the iron upside down and gently shaking it.
Allow the iron to cool down completely.
Wind the power cord around the base of the iron.
Store the iron in a vertical position.
ENGLISH
FAST&FURIOUS 5060 ULTRA 41