Publicidad
Idiomas disponibles
Idiomas disponibles
EN
TRANSMITTER
LINK
HDMI IN
DC 5V
DVD
LINKING TRANSMITTER AND RECEIVER
1.- Connect the transmitter and receiver with the supplied HDMI cable.
2.- Connect the receiver to the mains and wait 20-30 seconds until the LINK indicator light remains on
continuously.
3.- Connect the transmitter to the power supply and wait 20-30 seconds for the LINK indicator light to
switch from turned on to flashing
NOTE: if it does not go to the flashing state, start the process again.
TECHNICAL SPECIFICATIONS
FEATURES
HDMI
HDCP
LATENCY
POWER SUPPLY
DIMENSIONS
ACCESSORIES
SIMPLIFIED EU DECLARATION OF CONFORMITY
FONESTAR SISTEMAS S.A. hereby declares that the wireless HDMI extender VS-2490HD complies with Directive 2014/53/EU.
The complete text of the EU Declaration of Conformity is available at the following internet address:
fonestar.com/VS-2490HD
PAIR
SERVICE
IR OUT
5 V DC
IR OUT
IR
VS-2490HD
Wireless HDMI extender with H.265 compression technology.
Consisting of 1 transmitter and 1 receiver.
Transmission distance up to 100 m in direct line-of-sight for 1080p@60 Hz resolution.
Transmission frequency 5.8 GHz.
Compatible with 1080p@60 Hz.
Easy installation with no configuration required.
No interference with WiFi networks.
No need for direct line-of-sight between devices (maximum transmission distance is
reduced).
Remote control extender.
1.3
1.4
<120 ms
Transmitter and receiver: 5 V DC, 2 A with adapters included
Transmitter and receiver: 76 x 23 x 103 mm depth
1 remote control IR transmitter cable, 1.5 m
1 remote control IR receiver cable, 1.5 m
PAIR
SERVICE
IR IN
100 m max.
DVD CONTROL
- 4 -
RECEIVER
LINK
HDMI OUT
IR IN
MONITOR HD
DC 5V
5 V DC
Publicidad
