Descargar Imprimir esta página

JANE iTOURER Manual De Instrucciones página 47

Publicidad

Idiomas disponibles

Idiomas disponibles

• Guide the anchors towards the axles in your vehicle and press until both sides are
locked into place, two green signals on both buttons (5b) or two green lights on the
control panel (6) will show that they are securely anchored. If one or both of the signals
are red, try again. (5b)
• Press the base (3) against the backrest of the vehicle until it is firmly in place.
_ Adjusting the height of the headrest
The height of the headrest is adjusted using the handle found on the top of the headrest. To
release the lock pull the ring upwards, when you release it, the headrest will lock into the
nearest position.
• Pass the lower lap part or the shoulder part of the vehicle seat belt through the belt
guide on the side of the headrest (16).
• Position the child in the booster seat, and adjust the height of the headrest using the
handle (1a). The seat belt should be slightly above the child's shoulder. (6a)
IMPORTANT: Adjust this height as the child grows
EN
45

Publicidad

loading