Publicidad
Idiomas disponibles
Idiomas disponibles
To Clean and Maintain the Product
1. Cleaning
Before cleaning, please make sure that the product has been turned off and that the
adaptor has been pulled out from the socket.Please use dry cloth to clean the product.
2. Maintenance
Keep the product clean and far from the wet environment.
Cómo Operar
To reduce the risk of burns, fire, electric shock, or injury to persons:
01. The product should never be left unattended when plugged in. Unplug from outlet
when it is not used and before putting on or taking off parts.
02. Do not operate under a blanket or a pillow. Excessive heat can occur and cause fire,
electric shock, or injury to persons.
03. Do not carry this product by its supply cord or use the cord as a handle.
04. Never operate the product with the air openings blocked. Keep the air openings free of
lint, hair, and the like.
05. Do not drop or insert any object into any opening.
06. Do not use outdoors.
07. Do not operate where aerosol (spray) products are being used or where oxygen is
administered.
08. To disconnect, switch off all controls and remove the plug from outlet.
09. Close supervision is necessary when this appliance is used by, or near children,
invalids, or disabled persons to ensure that they do not misuse the product.
10. Keep the cord away from heated surface, otherwise it may cause serious burns. Do not
use over insensitive skin areas or in the presence of poor circulation.
11. The appliance has a heated surface. Persons insensitive to heat must be careful when
using the appliance.
12. The appliance must only be supplied at safety extra low voltage corresponding to the
marking on the appliance.
13. The appliance is only to be used with the power supply unit provided with the appliance.
14. This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities,or persons lacking experience and knowledge,
unless they have been given supervision or instruction concerning useof the appliance
by a person responsible for their safety.
Product Operation Guide
1. Connect the power adaptor to the electrical outlet.
2. Press the power button to begin the massage. Heating and rolling function would also
be activated.
3. Press the heating button to active heating function, or turn off the heating function.
4. Press the massage direction adjustment button to change massage direction.
5. Press the speed adjustment button to choose among 3 massage speed levels (low/medium/high).
6. Press the power button to stop the massage at any time.
5
Publicidad
