Chasing E-Reel Manual Del Usuario página 3

Manual
EN
V2.0
The E-Reel has 14 specialized stainless steel bearings, which adopts high precision
aluminum alloy synchronous belt to drive and high quality stainless steel
reciprocating lead-screw line anti-blast technology. Up to 200 meters of tether.
E-Reel offers 4800mAh large capacity battery, which is up to 30 retracting cycles.
E-Reel also supports manual rocker retracting to discharge line, and allows single
person operation and quick-deployment. Let you get rid of the trouble of manual
winding and enjoy the underwater exploration.
4
1 2 3
1. Power switch
2. Tether / charging socket
3. Speed knob： stop/slow/fast
4. Power indicator： Green 100%-60%； Blue 59%-20%； Red 19%-0%；
The indicator flashes when the motor is running
5. Handle interface
6. Handle
7. Lifting handle
8. 3 meters tether： Used for connecting the remote controller and the E-Reel
9. straightener
03
7
9
5
6
8
Connection
1. Connect the 3 meters tether to the E-Reel and Remote Controller.
2. Connect the tether of the E-Reel to the ROV tether socket and tighten the nut.
3. Reserve a suitable length and hang the tether sleeve on the tail safety buckle
and tighten it.
1
Instructions
1） Install
Press the button on the right Insert the tether plug into
side of the straightener to the groove interface of the
open the lid. E-Reel and tighten the nut.
turn on the switch, rotate Finishing.
the speed switch to slow/
fast speed and start winding.
EN
3
2
Install the tether into the
straightener and close the
lid.
In the case that the winder is
out of power, you can use the
manual handle for rewinding.
04