Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
1. Above screen you will find on the left side the micro-
SD and nano-SIM cards slot. Use the card removal
tool and insert it into the hole. The tray will be ejected
slightly.
2. Once the tray is fully pulled out, turn it over to put the
cards in their place as shown in the image. Turn the
tray over again and return it with the cards to their
place, making sure that it is fully inserted.
3. The base is on the back of device, use the cleft at the
bottom and move it to the most comfortable position
for each situation.
4. Connect the curled handset cord into the device base.
Longest end cable to be connected to base while the
other part to be linked to the handset. Connect power
supply cable to the connector on the side of the device
and then plug power supply into a household AC
power outlet.
5. If you want to remove the Tablet from its position, you
have to unlock the two screws on the back that are
indicated in the image. Insert the hex key and turn
both screws counterclockwise six turns. Then pull
of the Tablet across the top side until it is removed.
If you want to place the Tablet on the base, place it
in position properly, and then use the hex key to turn
each screw six turns clockwise.
26
| (EN) Quick guide
S D
Publicidad
