Publicidad
Idiomas disponibles
Idiomas disponibles
6
8.2 Closing
8.3 Install/remove the armrest
CP100B-xx / CP100R-xx / CP103R-xx / CP104-xx / CP105-xx / CP500B-xx / CP500R-xx / CP505-xx
•
Place the armrest rear side into the rear docking, then hook them into the front by
overturning them
•
To remove, unlock the armrest by pushing the front release lever, then overturn them and
extract by pulling the rear release lever
8.4 Install/remove the swing away or elevating legrest
• Lift powerfully the seat and close the
wheelchair. Push the handles close
(FIG.2)
(FIG.3)
(FIG.3)
•
Assembly the swing away or elevating legrest
by installing the hinge plates on the footrest
onto the hinge pins on the wheelchair frame.
Push the legrest toward inside of the wheelchair
until it locks into place
•
Remove the legrest by pushing the legrest release
lever, rotate outward, lift the legrest off the hinge pins
(FIG.5)
(FIG.4)
Images for illustrative purposes only
(FIG.4)
(FIG.5)
(FIG.2)
Publicidad
