ARDEA ONE START CP100B Serie Manual Del Usuario página 29

16.2 Technical specifications
• Steel frame
• Max weight for CP100-xx, CP500-xx:
• Max weight for CP103R-xx, CP104-xx, CP105-xx, CP505-xx:
• PVC front wheels (CP100R-xx): 20cm
• PU front wheels (CP103R-xx, CP104-xx, CP105-xx, CP500-xx,
• PU rear wheels (CP100R-xx, CP500R-xx,
• PU rear wheels (CP105-xx, CP500-xx,
• Fabric: Nylon
• Resistance to ignition: the materials used for cover and padding have been treated with
methods specified in Directive EN1021-1/2
• Reference standards: EN12183
• Environmental temperature: -20°C/+ 40°C
• Storage: store in a cool place, away from heat sources, such as sunlight (suggested
temperature between +10°C and +40°C)
17. WARRANTY
Moretti products are guaranteed from material or manufacturing faults for 2 years from the
purchasing date, except possible exclusion or restriction as follows. The warranty shall not be
applied in the possible damages caused by improper use, abuse or alteration, and for the warranty
will not be valid if the instructions for use are not strictly adhered to. The correct intended use is
specified in this manual. Moretti is not responsible for consequent damages, personal injuries or
whatever caused by or in relation to mistaken installation or improper use. Moretti warranty does
not cover damages resulting from: natural disaster, not authorized maintenance or repairs , faults
caused by problems on electricity supply (when necessary), use of spare parts not covered by
Moretti, improper use, alteration not authorized, shipment damages (different from original Moretti
shipment), or in case of insufficient maintenance as indicated in the manual. The warranty doesn't
cover components subject to wear and tear during the correct use of the device.
17.1 Repairing
Warranty repair: If a Moretti item presents material or manufacturing faults during the warranty
period, Moretti will confirm with customer if the fault can be cover from warranty. Moretti, at
its unquestionable discretion, can repair or replace the item, by a Moretti dealer or to Moretti
headquarters. Labor cost can be charged to Moretti if the repair is covered by warranty. A repair or
a replacement doesn't extend the warranty.
Repair not cover by warranty: A product out of warranty can be sent after Moretti authorization.
The labor and shipping costs for good out of warranty are to be paid by the customer or by the
dealer. The repairs are guaranteed for 6 months from the good received.
Non defective device: The customer will be informed if, after the device return and examination,
Moretti declares that the device is not faulty. In this case the good will be sent back to customer,
the shipping charge will be to be paid by the customer.
120 kg
CP104-xx): 60cm PU
CP505-xx): 30cm PU
130 kg
CP505-xx): 20cm
13