Publicidad
Idiomas disponibles
Idiomas disponibles
Filters and How To Use Them
The two most common types of fi lters used with the STABISCOPE are:
Polarizing ... eff ective for removing unwanted and distracting refl ections from surface of water or
glass. Also helpful for controlling contrast between sky and clouds.
Orange ......... fi lters out bluish light (haze and mist) to improve contrast.
To install, simply place one fi lter over each objective
lens. With polarizing fi lters, you can rotate each fi lter
after placing it over the objective lens to control the
exact degree of polarizing eff ect (contrast or remov-
al of refl ection) you want to achieve. (Fig. 17)
How to use the DC Regulator Pack
* No dry battery is required if an accessory DC regulator is used in areas where a direct current power
source is available; i. e., aircraft, vehicles, etc. (Even when dry batteries are provided in this unit, if
electricity is supplied through a DC regulator, the supply source of electricity will automatically be
changed over to the DC Regulator.)
1
The connecting method is as illustrated in
the fi gure. (Fig. 18)
2
The DC Regulator can be used within the
range of 12-32 V DC.
3
It is also possible to bend the cable as illus-
trated in the fi gure using connector cap.
(Fig. 19)
The cable of the external energizer has a+/- polarity. The white lead wire is posi-
d
CAUTION!
tive and the black lead wire is negative. Please take care to make the proper con-
nection.
EN-7
Fig. 17
Fig. 18
DC Regulator
connector
Electric cable (in)
DC Power
Fig. 19
ENGLISH
Electric cable (out)
DC
Regulator
Publicidad
