cecotec ENERGYSILENCE 5500 PURE TECH Manual De Instrucciones página 20

ENGLISH
1. PARTS AND COMPONENTS
Fig. 1
1. Dust filter
2. Cooling pad
3. Rear part
Handle
4.
5. Control panel
6. Air outlet
7. Wheels
Water tank
8.
9. Ice tank
10. Remote control
Control panel. Fig. 2
Touch icons
1. ON/OFF
2. Speed
Mode
3.
4. Timer
5. Oscillation
6. Cold
Ionisation
7.
Indicators
8. Timer
High
9.
10. Medium speed
11. Low speed
12. Ioniser
13. Cold
14. Oscillation
15. LED display
16. Eco mode
17. Sleep mode
18. Normal mode
38 ENERGYSILENCE 5500 PURE TECH
Note:
The graphics in this manual are schematic representations and may not exactly match the
product.
2. BEFORE USE
- This appliance is packaged in a way as to protect it during transport. Take the appliance
out of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent product damage when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If any of them
are missing or not in good condition, please contact Cecotec's official Technical Support
Service immediately.
Box contents
- EnergySilence 5500 PureTech evaporative cooler
- Remote control
- Instruction manual
Assembling the evaporative cooler
Remove the packaging carefully so as not to damage the plastic main body with scissors
1.
or a knife.
2. Installing the wheels: fit the 4 wheels into the holes at the base of the cooler. Firmly insert
the wheels into the body of the cooler.
Place the appliance on a stable, horizontal base, keeping it away from sources of radiant
3.
heat and open flames.
4. Water filling: turn the water-tank lock to the horizontal position, remove the water tank,
insert the ice bricks, and fill the tank with clean tap water. Make sure that the water level
does not exceed the "MAX" mark on the back of the tank.
5. Push the water tank until it clicks into place and turn the tank lock to the vertical position.
3. OPERATION
Using the evaporative cooler
Plug the power cord into the outlet. The LED display showing the room temperature will light
up and the cooler will enter Standby mode. Modes and functions of the appliance can be
toggled via the control panel or remote control.
ENGLISH
ENERGYSILENCE 5500 PURE TECH 39