RODI home R300 Manual De Instrucciones página 16

PT
H
EN
FR
ES
Rotate the metal mounting ring and the equipment body
until the drain pipe of the waste disposal equipment is a ligned
with the pipe of the plumbing.
Connecting the air switch
J
J1
J3
J4
Remove the fixing ring in the direction of the arrows (J1).
Connect the compressed air tube to the switch (J2). Insert
the switch already connected to the compressed air tube
(J3). Replace the fixing ring in the direction of the arrows
(J4). Check that it is properly fixed.
J2
35 mm
RODI INDUSTRIES, S.A. |
I
Rotate the metal mounting ring to the right until it is fully
threaded. Place the equipment latch in the leftmost posi-
tion of the mounting ring.
NOTE: Put some lubricant on the latch and on the metal mount­
ing ring if they are not sliding correctly. Open the mixer and
check for water leaks.
J5
Connect the compressed air tube to the waste disposal (J5).
16