Publicidad
Idiomas disponibles
Idiomas disponibles
• You can now adjust the headrest to the desired height. When the height is adjust
the lever, and the headrest will be locked in position. The headrest has 10 positi
Place the child seat on the vehicle seat. Place your child in the seat and check the height of the
headrest. Warning! If necessar
optimum height.
4.2 Seat tilt angle adjustment
The child seat is equipped with a tilt angle adjustment functi
(G) and adjust the seat forward or backward. Release the lever in the desired position and push
gently until it clicks.
5. Installation in the vehicle
In case of sudden braking or an accident, persons not using seat belts can cause damage to
other passengers.
Always check the
following:
• The seat backrests are locked in the vehicle
• All heavy objects and sharp edges are secured (e.g. on the rear parcel shelf).
• All passengers fastened their seat belts.
• The safety seat is always protected
Protecting vehicle upholstery
Seat covers in some vehicles can be made of soft mat
traces. They can be avoided by placing a blanket or towel under the safety seat.
5.4 Installing the car safety seat in weight groups 2 and 3 using the vehicle 3-point safety
belts.
IMPORTANT The instruction manual of the vehicle manufacturer specifies the location of the
fixing points and other necessary information regarding the installation of the seat in the car
The user MUST read the inst
Preparing the seat:
• Adjust the headrest to the child 's height (see section
• Make sure that both ISOFIX attachments (I) are hidden in the seat
the release button (K) and slide the ISOFIX attachment back to the base. Repeat the steps
above to move back the attachment on the other side of the seat.
• Place the child seat on the vehicle seat
the vehicle seat
.
Tip: If the car seat headrest does not allow you to do that, have it removed or placed in a
different
way.
Placing the child in the child seat:
• Place your child in the seat and place the car safety belt in front of the child. Fasten the
vehicle seat belt and make sure you hear a typical
EN
y,
repeat the headre st adjustment proce ss until you obtain the
(i.e.
,
even if the child is not in
r
uc ti on manual of the vehicle manu facturer
.
Make sure that the child seat backrest rests flat on
19
on.
Pull the tilt adjust ment lever
foldable back seat is locked)
it.
erials
so the safety seat may leave some
4.1).
"click" .
ed,
release
ons.
.
.
base.
If not, pull and hold
.
Publicidad
