Movement Rock Air Bike Manual Del Propietário página 68

Idiomas disponibles

OPERATING INSTRUCTIONS

ELECTRONIC MODULE

TIME

•Press the TARGET TIME (KEY 15) and the TIME display (DISPLAY 3) will light up, along with a 1s audible

alert.

•Press UP / DOWN (KEY 10 or 11) to adjust the value (Figure 39) then press ENTER (KEY 19) to con rm.

•The preset TIME value counts down, DISTANCE (DISPLAY 4), CALORIES (DISPLAY 5), WATTS (DISPLAY 6),

SPEED (DISPLAY 2) and RPM (DISPLAY 1) start counting. (Figure 40).

•No input signal for 30s, console will emit 1 short beep and enter standby mode.

•Press the START (KEY 8) once to enter the PAUSE mode, an audible alert will sound for 0.5s every 30s.

All values are shown on the display and will ash every 4s. If training is stopped for 5 minutes, the audible

alert will sound for 2s and go into standby mode. Press START (KEY 8) to resume training.

•Press the STOP key (KEY 9) to end the training, the TIME display (DISPLAY 3) will show the total training

time; DISTANCE (DISPLAY 4) will display the total exercise distance; CALORIES (DISPLAY 5) will display the total

consumption during training; WATTS (DISPLAY 6), SPEED (DISPLAY 2) and RPM (DISPLAY 1) will change to

display AVG. & MAX. The HEART RATE display (DISPLAY 7) will change to display 65%, 85% MAX (Figure 21

~ 23) every 5s.

•Upon input of the heart rate signal, the HEART RATE display (DISPLAY 7) will show the user's rate. If

there is no signal, nothing will be displayed. (Figure 19~20).

DISTANCE

•Press the TARGET DISTANCE key (KEY 12) and the DISTANCE display (DISPLAY 4) will light up, along

with a 1s audible alert.

•Press UP / DOWN (KEY 10 or 11) to adjust the value (Figure 41) then press ENTER (KEY 19) to con rm.

•The preset DISTANCE value counts down, TIME (DISPLAY 3), CALORIES (DISPLAY 5), WATTS (DISPLAY 6),

SPEED (DISPLAY 2) and RPM (DISPLAY 1) start counting. (Figure 42)