Publicidad
Idiomas disponibles
Idiomas disponibles
Getting started
START THE LANDROID VISION
Get familiar with the control panel
Landroid Vision's control panel provides the key functions in a minimalistic design.
For advanced functions, the free Landroid Vision app provides further options in a richer interface: your smartphone.
START
start mowing
HOME
Sends Landroid Vision to its
charging base during operation
and activates charging
1. Start Landroid Vision (See Fig. 25)
A. It is recommended that you start Landroid Vision from the charging station after fully charging.
B. Press
until the screen lights up.
C. Rotate the knob clockwise to select the default PIN "0000". Short press
code OK".
D. Press the
, then press
E. You can stop Landroid Vision at any time by pressing the
F. To send Landroid Vision to the charging station, press the
2. Update the software
It is recommended you to update the software to the latest firmware. It helps Landroid Vision become smarter. Please note that
Landroid Vision should be updated to the latest firmware at the first time.
Over-the-Air (OTA) updates
If your Landroid Vision is connected to your Wi-Fi network, you will be notified that new software is available via the app. Once you
confirm, the update will happen automatically Over-the-Air.
Manual updates
A. If your Landroid Vision is not connected to your Wi-Fi network, you can still update it to the latest software version with a USB
stick.
B. Regularly visit the Worx Landroid Vision website to check if any new version is available. If you subscribed to Landroid Vision
email list, you will be notified when a new version is available.
C. Download the latest software version at our website.
D. Take a blank USB stick formatted in FAT32.
E. Save the file and extract the content to your USB stick.
F. Make sure your Landroid Vision is getting charged.
G. Turn off Landroid Vision.
H. Open the battery cover of the Landroid Vision to access the USB port.
22
Wed.11/29 09:00PM
STOP
. Landroid Vision will start mowing.
to select each number. The screen will display "PIN
.
, then press
.
DISPLAY
RETURN
Back to proceeding menu
POWER ON/OFF
Turns Landroid Vision on and off
DISABLING DEVICE
Prevents operation of
Landroid Vision
KNOB (Select and Enter)
SAFETY STOP BUTTON
EN
Publicidad
