Worx WR208 Instrucciones De Usuario página 23

Getting started
I. Insert the USB stick in the port.
J. Turn on Landroid Vision.
K. Without lifting Landroid Vision, remove the USB stick when "Please remove the USB key" is displayed.
L. The update will begin automatically and may take a while. Landroid Vision will restart automatically after the update is comple-
ted.
Make sure Landroid Vision is charging and the battery capacity has reached 50% prior to starting the firmware update.
NOTE:
3. Identify the boundary (See Fig. 26)
The Landroid Vision will follow the lawn edge in a circle to identify the boundary:
A. at the first time when it is started and comes out of the charging base.
B. there is a new zone for Landroid Vision to cut.
NOTE: Make sure Landroid Vision starts at the charging base and has at least 50% battery.
EN
23