FAFREES F1 Manual Del Usuario página 8

Product installation:
1.Cut all the nylon straps to ensure that the front wheel can be smoothly separated
from the frame and when the rear wheel can rotate freely. Turn the bicycle upside
down as shown above to facilitate the installation of the front wheel.
2.Loosen the left and right front axle screws.
3.Put the front wheel on the front fork for installation, pay attention to the disc brake
pad and the disc brake to match in place. Put the front axle into the opening of the
front fork, insert the safety hook into the safety hole outside the fork, and tighten the
right and left screws finally.
EN 05