Publicidad
Idiomas disponibles
Idiomas disponibles
15.
Never disassem ble the rechargeable battery and
charger.
16.
Never short-circuit the rechargeable battery.
Short-circuiting the battery w ill cause a great
electric current and overheat. It results in burn or
dam age to the battery.
17.
Do not dispose of the battery in fire.
If the battery burnt, it m ay explode.
18.
Do not insert object into the air ventilation slots
of the charger.
SPECIFICATIONS
POWER TOOL
M odel
No-load speed
Screw size
Capacity
Screw length
Tightening torque
Rechargeable battery (EB12)
Bit shank size
Weight
CHARGER
M odel
Charging tim e
Charging voltage
Weight
STANDARD ACCESSORIES
(1) Screw feed attachm ent ............................................ 1
(Assem bled in m ain body)
(2) No. 2 Plus Bit ........................................................... 1
(Assem bled in m ain body)
(3) Hook ............................................................................ 1
(4) Charger (UC12Y) ....................................................... 1
(5) Plastic case ................................................................ 1
Standard accessories are subject to change w ithout
notice.
APPLICATIONS
Screw driving into indoor gypsum board
Driving and rem oving of sm all screw s, sm all bolts,
etc.
19.
20.
WF4DY
0 ~ 2000/m in (at 20°C, w ith fully charged battery)
4 m m
25 – 41 m m
M axim um 900 kg-cm
Tightening is M 12 high tension bolt (strength grade 12.9), w hen
fully charged in 20°C tem p. Tightening tim e: 3 sec.
Use hexagonal socket.
Ni-Cd battery, 12V. No. of tim es rechargeable: about 500
6.35 m m Hex.
2.0 kg
UC12Y
Approx. 1 hour (at 20°C)
2.4 – 12V
1.3 kg
BATTERY REM OVAL/ INSTALLATION
1. Battery removal
2. Battery installation
Inserting m etal objects or inflam m ables into the
charger air ventilation slots w ill result in electrical
shock hazard or dam aged charger.
Bring the battery to the shop from w hich it w as
purchased as soon as the post-charging battery
life becom es too short for practical use. Do not
dispose of the exhausted battery.
Using an exhausted battery w ill dam age the
charger.
Hold the handle tightly and push the battery latch
and pull out the battery. (Fig. 1)
Insert the rechargeable battery, m aking sure that the
latch is on the trigger sw itch side of the handle.
(Fig. 1)
Handle
Rechargeable
battery
Fig. 1
English
Insert
Pull out
Latch
2
Publicidad
