Publicidad
Idiomas disponibles
Idiomas disponibles
IF YOUR REMOTE LOOKS LIKE THIS ONE
Programming Instructions:
1.
Sit in the driver's seat and close all doors.
2.
Open the driver's door.
3.
Close the door.
4.
Insert the key into the ignition, turn ignition
switch from Lock to ON (as far as you can go
without cranking) 10 times in rapid succession
ending in Lock (within 15 seconds). The horn will
chirp to indicate the vehicle has entered key fob
learn mode. Do not remove the key.
5.
Open the driver's door.
6.
Close the driver's door.
7.
Press any button on the remote that your wish to program in the system. The horn will chirp 2
times to indicate that the remote has been programmed.
8.
Repeat steps 5 through 7 for any additional remotes (including original remotes originally
programmed to the vehicle)
9.
Remove the ignition key from the ignition switch. The horn will chirp 3 times to indicate the
system has exited learn mode.
FCC WARNING
Statement 15.19(a)(3): This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation. Changes
or modifications not expressly approved by Dorman Products Inc. could void the user's authority to
operate the equipment.
IC WARNING
The term IC before the Certification/Registration number only signifies that the Industry Canada
technical specifications were met.
2
Publicidad
