Schaeffler LASER-TRUMMY2 Instrucciones De Servicio página 15

Belt mass
Drive belts and belt mass
Technical data
LASER-TRUMMY2
Schaeffler Technologies
For calculation of the belt mass, refer to table or manufacturer's
datasheet, or weigh the drive belt and convert the mass to give
a value for a belt length of 1 m.
Drive belts
V-ribbed belts (kg/m per 10 ribs)
PJ = 0,082 PM = 1,100
V-belts (kg/m per belt)
SPZ = 0,074 17 = 0,196
SPB = 0,195 22 = 0,324
10 = 0,064 32 = 0,668
Power belts (kg/m per V-belt rib)
SPZ = 0,120 3V/9J = 0,120
SPB = 0,261 8V/25J = 0,693
Polyurethane toothed belts (kg/m per 10 mm width)
T2,5 = 0,015 AT3 = 0,023
T10 = 0,048 AT10 = 0,063
Technical data, see table.
Component
Measurement range
Minimum free belt strand
Digital sampling error
Display error
Total error
Temperature Nominal value
Operation
Transport
Housing
Dimensions Device
Case
Display
Available languages
Input limits Free strand length
Belt mass
Power supply Designation
ANSI
IEC
Dimensions
Calibration (recommended)
PL = 0,320 –
SPA = 0,123 20 = 0,266
SPC = 0,377 25 = 0,420
13 = 0,109 40 = 0,958
SPA = 0,166 5V/15J = 0,252
SPC = 0,555 –
T5 = 0,024 AT5 = 0,034
T20 = 0,084 AT = 0,106
Technical data
10 Hz up to 800 Hz
150 mm
1%
1 Hz
5%
+20 °C
+10 °C up to +50 °C
–5 °C up to +50 °C
Plastic (ABS)
80 126 37
255 210 60
2 lines LCD, 16 characters
10
up to 9,990 m
up to 9,999 kg/m
Battery (9 V)
1604DPP3
6LR61/AM-6
48,5 26,2 17
2 years (periodic)
BA 21
EN
13