Bosch GOP 185-LI Professional Manual Original página 10

10 | English
Application tool
PAII 52 APT/
PAII 52 APIT
StarlockPlus
52 × 50 mm
carbide plunge cut
saw blade for
multi-material
AYZ 53 BPB
Starlock
53 × 40 mm
plunge cut saw
blade for multi-
material
AII 65 APB/
AII 65 APIB
Starlock
65 × 40 mm bi-
metal plunge cut
saw blade for wood
and metal
ACZ 85 EB/
ACZ 85 EIB
Starlock
85 mm diameter
bimetal segment
saw blade for wood
and metal
ACZ 100 SWB
Starlock
100 mm diameter
bimetal segment
serrated knife for
multi-material
ACZ 105 ET
Starlock
105 mm diameter
carbide segment
saw blade for
multi-material
ACZ 70 RD4
Starlock
70 mm diameter
Carbide-RIFF seg-
ment saw blade for
mortar and abras-
ive materials
ACZ 85 RD4
Starlock
85 mm diameter
Diamond-RIFF seg-
ment saw blade for
mortar and abras-
ive materials
1 609 92A 8AZ | (12.12.2022)
Material Application
Hard ferrous sheet metal, Long saw blade for splinter-free separation and plunge
epoxy, plasterboard, cuts in sheet metal thanks to round sawing edge (Curved-
GFRP, CFRP, cement Tec); long service life thanks to BOSCH carbide techno-
fibreboard logy;
Example: Cutting through sheet metal, cutting through
screws in window frames
Gypsum boards, chip- Optimised for plunge saw cuts with a subsequent longer
boards, sandwich mater- separation cut; the Dual-Tec shape ensures a clean and
ial, wood complete cut both in the corners and during a longer sep-
aration cut;
Example: Plug socket recesses in gypsum boards or
wooden walls
Softwood, hardwood, Splinter-free separation and plunge cuts thanks to round
veneered boards, plastic- sawing edge (Curved-Tec) in coated boards or hardwood;
coated boards, non- Example: Shortening door frames, recesses in laminate
hardened nails and bolts flooring for a tray or built-in furniture, cutting through non-
hardened nails and bolts when flush with the surface
Wooden materials, Separation and plunge saw cuts;
plastic, soft and non-fer- also for sawing close to the edge in difficult-to-access
rous metals areas;
Example: Shortening already installed skirting boards or
door frames, plunge cuts when adapting floor panels
Insulation material, insula- Precise cutting of soft materials;
tion boards, floor panels, example: Cutting insulation boards to size, cutting pro-
impact sound insulation truding insulation material to length so that it is flush with
boards, cardboard, car- the surface
pets, rubber, leather
Fibre cement boards, tile Separation and plunge saw cuts; also for sawing close to
joints, brick, fibreglass-re- the edge in difficult-to-access areas; long service life
inforced plastics, lamin- thanks to BOSCH carbide technology;
ate Example: Shortening already installed skirting boards or
door frames, milling cable ducts in brick, quick and low-
dust cutting out of tile joints, cutting fibreglass boards to
size for fittings, adjustment work in laminate; available
from mid-2021
Thin tile joints, porous Cutting and separating with a particularly thin blade
concrete, soft brick, ce- (1.6 mm) in areas and corners that are close to the edge
ment fibreboards, fibre- or difficult to access, long service life thanks to Carbide-
glass-reinforced plastics, RIFF;
epoxy Example: Removing joints between wall tiles for repair
work, recesses in tiles;
also available as a version for normal joints: ACZ 85 RT3
Cement joints, soft wall Cutting and separating in areas and corners that are close
tiles, fibreglass-reinforced to the edge or difficult to access, extra long service life
plastics, epoxy, GKF thanks to Diamond-RIFF;
Example: Removing joints between wall tiles for repair
work, recesses in tiles;
also available as Carbide-RIFF version: ACZ 85 RT3 for
normal joints, ACZ 70 RT5 for thin joints
Bosch Power Tools