Descargar Imprimir esta página

GreenWorks BTG901 Manual Del Operador página 7

Publicidad

Idiomas disponibles

Idiomas disponibles

EN
If the battery pack cracks or breaks, with or without
leaks, do not recharge it and do not use. Discard it
and replace with a new battery pack. DO NOT TRY
TO REPAIR IT! To prevent injury and risk of fire,
explosion, or electric shock, and to avoid damage to
the environment:
Cover the terminals of the battery with heavy-duty
adhesive tape.
DO NOT try to remove or destroy any of the
battery pack components.
DO NOT try to open the battery pack.
If a leak develops, the released electrolytes are
corrosive and toxic. DO NOT get the solution in the
eyes or on skin, and do not swallow it.
DO NOT put these batteries in your regular
household trash.
DO NOT incinerate.
DO NOT put them where they will become part of
any waste landfill or municipal solid waste stream.
Take them to a certified recycling or disposal
center.
6
RISK LEVELS
The following signal words and meanings are intended
to explain the levels of risk associated with this product.
SYM-
SIGNAL
BOL
DANGER
WARNING
CAUTION
CAUTION
7
INSTALLATION
7.1
UNPACK THE MACHINE
Make sure that you correctly assemble the machine
before use.
English (Original Instructions)
WARNING
MEANING
Indicates an imminently
hazardous situation, which,
if not avoided, will result in
death or serious injury.
Indicates a potentially haz-
ardous situation, which, if
not avoided, could result in
death or serious injury.
Indicates a potentially haz-
ardous situation, which, if
not avoided, may result in
minor or moderate injury.
(Without Safety Alert Sym-
bol) Indicates a situation
that may result in property
damage.
WARNING
WARNING
If parts of the machine are damaged, do not use
the machine.
If parts are missing, do not operate the machine.
If parts are damaged or missing, contact the
service center.
1. Open the package.
2. Read the documentation provided in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and packing material in compliance
with local regulations.
WARNING
For your personal safety, do not insert battery before
the tool is assembled completely.
7.2
INSTALL THE BATTERY PACK
WARNING
If the battery pack or charger is damaged, replace
them directly.
Read, understand, and follow the instructions in
the battery and charger manual.
1. Press the lower part of battery compartment flap to
open.
2. Align the lift ribs on the battery pack with the
grooves in the battery compartment.
3. Push the battery pack into the battery compartment
until the battery pack locks into place.
4. When you hear a click, the battery pack is installed.
5. To remove the battery, open the battery
compartment flap then press the battery release
button on the top of the battery pack and pull the
battery pack out of speaker.
TIP: This speaker can also connect to the power outlet
directly. Insert the included adapter to supply the power.
This will automatically provide continuous current to
your speaker.
6

Publicidad

loading